Canon EOS-1Ds Gebrauchsanleitung
82
Program AE
Select < > on the LCD panel.
•
While pressing the <
> button, turn the <
>
dial to select < >. Then release the <
>
button.
1
Focus the subject.
•
Look through the viewfinder and aim the Area AF
ellipse over the subject. Then press the shutter
button halfway.
ellipse over the subject. Then press the shutter
button halfway.
s
The AF point which achieves focus flashes briefly.
At the same time, the green focus confirmation light
<
At the same time, the green focus confirmation light
<
> in the viewfinder is displayed.
s
The exposure setting will be displayed on the LCD
panel and in the viewfinder.
panel and in the viewfinder.
•
If the focus confirmation light <
> in the viewfinder
blinks, the shutter will lock and a picture cannot be
taken. See “When Autofocus Fails (Manual
Focusing)” on page 73.
taken. See “When Autofocus Fails (Manual
Focusing)” on page 73.
2
AF point
Focus confirmation
light
Area AF ellipse
light
Area AF ellipse
Shutter speed
Aperture
Exposure setting
Make sure the exposure setting is not
blinking, then press the shutter button
fully to take the picture.
blinking, then press the shutter button
fully to take the picture.
3
AE is an abbreviation for Auto Exposure.
The Program AE mode is set automatically as the camera’s initial shooting mode.
(
(
→p.34)