Canon vb-s900f Bedienungsanleitung
160
The reset switch is located in a recessed area. Push
the switch using the tip of a slender object such as a
clip.
All settings of the camera, except for the date and
time, are restored to factory default settings.
For top cover attachment, see the “Installation Guide”
included with the camera.
3
Turn on the power while pushing the reset switch, and
keep pushing the reset switch for 5 seconds or more.
Important
If the reset switch is pushed, network-related settings will also
be restored to factory default settings including the camera's IP
be restored to factory default settings including the camera's IP
address, subnet mask, default gateway address, etc.
Accordingly, you can no longer operate the camera from the
computer you were using to connect to the camera before.
computer you were using to connect to the camera before.
When initializing the camera, use the “VB Initial Setting Tool”
installed in your computer to set an IP address appropriate for
the environment in which the camera is used (See “Performing
Initial Settings for the Camera” (p. 28)).
Initial Settings for the Camera” (p. 28)).
Reset Switch
Reset Switch
4
For VB-S30D/VB-S31D/VB-S800D, attach the top
cover.