Canon PowerShot G7 X Mark II Handbuch
343
ç
Contents
●
Network authentication / data encryption (encryption method /
encryption mode)
The method for encrypting data during wireless transmission.
Check which security setting is used: WPA2-PSK (AES),
WPA2-PSK (TKIP), WPA-PSK (AES), WPA-PSK (TKIP), WEP
(open system authentication), or no security.
●
Password (encryption key / network key)
The key used when encrypting data during wireless
transmission. Also called the “encryption key” or “network key”.
●
Key index (transmit key)
The key set when WEP is used for network authentication /
data encryption. Use “1” as the setting.
●
If system administrator status is needed to adjust network
settings, contact the system administrator for details.
settings, contact the system administrator for details.
●
These settings are very important for network security. Exercise
adequate caution when changing these settings.
adequate caution when changing these settings.
●
For information on WPS compatibility and for instructions on
checking settings, refer to the access point user manual.
checking settings, refer to the access point user manual.
●
A router is a device that creates a network (LAN) structure for
connecting multiple computers. A router that contains an internal
Wi-Fi function is called a “Wi-Fi router”.
connecting multiple computers. A router that contains an internal
Wi-Fi function is called a “Wi-Fi router”.
●
This guide refers to all Wi-Fi routers and base stations as “access
points”.
points”.
●
If you use MAC address filtering on your Wi-Fi network, be sure
to add the camera’s MAC address to your access point. You
can check your camera’s MAC address by choosing MENU
(= 58) ► [ 4] tab ► [Wireless settings] ► [Wi-Fi Settings] ►
[Check MAC Address].
to add the camera’s MAC address to your access point. You
can check your camera’s MAC address by choosing MENU
(= 58) ► [ 4] tab ► [Wireless settings] ► [Wi-Fi Settings] ►
[Check MAC Address].