Canon EOS 5D Mark IV Техническое Руководство
1
Specifications
Type
Type
Digital, AF/AE single-lens reflex camera
Recording Media
(1) CF card
• Type I drive (Type II and Microdrive non-supported.)
• UDMA Mode 7 supported.
• CFast cards cannot be used.
• UDMA Mode 7 supported.
• CFast cards cannot be used.
(2) SD, SDHC and SDXC memory cards
• UHS-I supported.
• MultiMediaCards (MMC) cannot be used (results in error).
• UHS-II not supported. If a UHS-II card is used, it may be slower than a UHS-I (depends on the card
• MultiMediaCards (MMC) cannot be used (results in error).
• UHS-II not supported. If a UHS-II card is used, it may be slower than a UHS-I (depends on the card
specifications).
Compatible Lenses
Canon EF Lenses (excluding EF-S and EF-M lenses)
Lens Mount
Canon EF Mount
Image Sensor
Type
CMOS sensor (Compatible with Dual Pixel CMOS AF)
Pixel Unit
Approx. 5.36 µm square
Effective Pixels
Approx. 30.4 megapixels
Total Pixels
Approx. 31.7 megapixels
Aspect Ratio
3:2 (Horizontal: Vertical)
Color Filter System
RGB primary color filters
Low Pass Filter
Installed in front of the image sensor, non-detachable
Dust Deletion Feature
(1) Self Cleaning Sensor Unit
• Removes dust adhering to the low-pass filter.
• Self-cleaning can be done automatically when the power is turned on / off.
• After the cleaning is performed, the camera will automatically restart (Power OFF to ON).
• When you use Multi Shot Noise Reduction, “Clean now” cannot be selected.
• Self-cleaning can be done automatically when the power is turned on / off.
• After the cleaning is performed, the camera will automatically restart (Power OFF to ON).
• When you use Multi Shot Noise Reduction, “Clean now” cannot be selected.
(2) Dust Delete Data acquisition and appending
• The coordinates of the dust adhering to the low-pass filter are detected by a test shot and appended
to subsequent images.
• The dust coordinate data appended to the image is used by the EOS software DPP to automatically
erase the dust spots.
(3) Manual cleaning