Canon DP-V3010 Handbuch
72
Main specifications/Performance
Interface
Control
USB
1
USB A receptacle port
Universal Serial bus specification revision 2.0 compliant LS (Low Speed)/FS (Full
Speed)/HS (High Speed) mode compatible
Enhanced host controller interface specification revision 1.0 compliant
USB A receptacle port
Universal Serial bus specification revision 2.0 compliant LS (Low Speed)/FS (Full
Speed)/HS (High Speed) mode compatible
Enhanced host controller interface specification revision 1.0 compliant
LAN
1 RJ-45 terminal
IEEE802.3 10BASE-TX / IEEE802.3u 100BASE-TX compliant
IEEE802.3 10BASE-TX / IEEE802.3u 100BASE-TX compliant
Display Controller
General
Power
Rated Voltage: 100 – 240 V AC
Rated Frequency: 50/60 Hz
Rated Frequency: 50/60 Hz
Power consumption
At maximum load: Approximately 2 W
At factory shipment: Approximately 2 W
At factory shipment: Approximately 2 W
Environmental
Conditions
Conditions
Operating
Temperature and humidity: 5 – 35 °C (41 – 95 °F), 20 – 80 %RH (no condensation)
Storage/Transporting
Temperature and humidity: -20 – 40 ˚C (-4 – 104 °F), 10 – 85 %RH (no condensation)
41 – 60 ˚C (105 – 140 °F), 10 – 40 %RH (no condensation)
Dimensions (width x height x depth)
Approximately 419 x 56 x 88 mm (16.5 x 2.2 x 3.5 in.)
Weight
Approximately 460 g (16.2 oz)
Mounting Hole Pitch
EIA2U standard 76.2 x 465.9 mm (3.0 x 18.3 in.)
Interface
Control
LAN
1 RJ-45 terminal
Weight and dimensions are approximate. Error and omissions excepted.
The information in this manual is verified as of May 2016. It is subject to change without notice.
The information in this manual is verified as of May 2016. It is subject to change without notice.