Canon EOS-1D C Handbuch

344

85: Custom Controls

During metering, you can select an AF point directly with the <5> dial 
or <9> without pressing the <S> button. With the <5> dial, you can 
select a left or right AF point, or cycle through the zones if using Zone AF.

*4: If you use <9> and press the <B> button in step 3 on page 337, you can press 

<9> straight down to select [Switch to center AF point] or [Switch to registered 
AF point].

You can select the AF point directly with the <5> dial without first 
pressing the <S> button. While metering is active, turning the <5> dial 
will select a horizontal AF point, or cycle through the zones if using Zone 
AF. The functions of the <O> and <S> buttons will be switched 
between them. By holding down the <S> button and turning the <6> 
dial, you can set the exposure compensation or aperture.

When you press the shutter button halfway, only exposure metering is performed.

When you press the button assigned to this function, you can lock the 
exposure (AE lock) during the metering. This is convenient when you 
want to focus and meter the shot separately or when you want to take 
multiple shots at the same exposure setting.

The exposure will be locked (AE lock) while you press the shutter button.

When you press the button assigned to this function, you can lock the exposure 
(AE lock). The AE lock will be maintained until you press the button again. This 
is convenient when you want to focus and meter the shot separately or when 
you want to take multiple shots at the same exposure setting.

: Select AF point, O z S (  during metering)

If you assign [AE lock (while button pressed)] to the shutter button, any 
buttons assigned to [AE lock] or [AE lock (hold)] will also work as [AE lock 
(while button pressed)].

COP

Y