Brocade Mobility 650 BR-AP065060010US Datenbogen

BROCADE MOBILITY 650 AP SPECIFICATIONS 

Performance and supported configurations

Radio options

Single radio 802.11a/n or 802.11b/g/n support with 2×3 

MIMO or RP-SMA antenna connectors; or dual-radio 802.11a/n

and 802.11b/g/n support with 2×3 MIMO or RP-SMA antenna 

connectors

Mode operation

Thin (dependent) Access Point (AP) 

BSSID support

Four BSSIDs per radio

Powered clients

CAM- and PSP-powered clients supported

Concurrent clients

Up to 127 client associations

Traffic management and Quality of Service

Quality of Service

Voice prioritization; WMM-power save with TSPEC Admission

Control; WMM U-APSD; Layer 1-4 packet classification;

802.1p; 802.11e; 802.11k; DiffServ/TOS, SVP, SIP CAC

Rate limiting 

Broadcast/multicast transmit rate control, client rate limiting, 

per radio client limit

Client load balancing 

Neighbor APs share client load by client count or traffic load

Wireless security

Wireless IPS/IDS

Rogue detection, radio provides dedicated full-time 24×7 

scanning of 2.4 GHz and 5.0 GHz bands for air monitoring, 

wireless IPS, onboard IDS

Authentication

ACLS; Pre-Shared Keys (PSK); 802.1x/EAP-Transport Layer

Security (TLS); Tunneled Transport Layer Security (TTLS);

Protected EAP (PEAP); local authentication database, AAA

Server; support for RADIUS, LDAP, and ActiveDirectory

Encryption

WEP 40/128 (RC4); WPA-TKIP; WPA2-CCMP (AES); 802.11i

WPA2-TKIP; Multi-Cipher support

Guest access

Built-in captive portal; customizable login/welcome pages;

URL redirection; support for external authentication and  

billing systems; client-client transmission disallow

Internet Protocol Security 

(IPSec) VPN

Supports Data Encryption Standard (DES), 3DES, AES-128, and 

AES-256 encryption; supports site-to-site VPN capabilities

Stateful firewall

Stateful Layer 3 packet inspection; stateful Layer 2–7

wireless firewall; Access Control Lists (ACLs)

Networking services

Layer 2 and Layer 3  

802.1D-1999 Ethernet bridging; 802.11-802.3 bridging;

802.1Q VLAN trunking and tagging; DHCP servicer/client,

BOOTP client, Dynamic DNS (DynDNS), PPPoE, NAT, LLDP, 

IP Filtering, Content Filtering (files or URL extensions, HTTP,

SMTP, and FTP requests) NAT, ARP/Proxy ARP

Management

Configuration

Java-based Web user interface, human-readable config file

import/export, CLI (RS-232 or Telnet), SSH, HTTP/S, MIB, 

programmable SNMP v1/v2c/v3 trap support

Statistics

LAN, wireless and associated stations (accessible via 

Brocade Mobility Controller Web UI)

Software/firmware

updates

File Transfer Protocol (FTP) or Trivial File Transfer Protocol 

(TFTP), remote auto available

Physical characteristics (internal antenna)

Dimensions

24.1 cm L × 18.916 cm W × 4.360 cm H  

(9.5 in. L × 7.5 in. W × 1.7 in. H)

Weight

0.91 kg (2.0 lb)

Housing

Plastic

Available mounting 

configurations

Ceiling mount (to suspended ceiling T-bars, below tile);  

wall mount

LED indicators

Two LED indicators with multiple modes indicating  

2.4 GHz/5.0 GHz activity, power, adoption, and errors

Ethernet ports

Auto-sensing 10/100/1000 Base-T Ethernet

Lock option

Kensington

Physical characteristics (external antenna)

Dimensions

21.64 cm L × 14.10 cm W × 3.771 cm H  

(8.5 in. L × 5.6 in. W × 1.5 in. H)  

Weight

1.1 kg (2.5 lb)

Housing

Metal, plenum-rated housing (UL2043)

Available mounting 

configurations

Ceiling mount (above tile); wall mount

LED indicators

Two LED indicators with multiple modes indicating  

2.4 GHz/5.0 GHz activity, power, adoption, and errors

Antenna connectors

Six RP-SMA

Ethernet ports

Auto-sensing 10/100/1000 Base-T Ethernet

Lock option

Kensington

Environmental specifications

Temperature

Operating: 0°C to 50°C (–4°F to 122°F)  

Storage: –40°C to 70°C (–40°F to 158°F)

Operating humidity

5% to 95% (without condensation)  

Altitude

Operating: 2438 m (8000 ft) 

Storage: 4572 m (15,000 ft)

Electrostatic discharge

+/- 15 kV (air), +/- 8 kV (contact)  

Power specifications

Operating voltage

802.3af supply, 48 VDC at 12.95 W (typical), 36 VDC to  

57 VDC (range)  

Operating current

270 mA (typical)  

Integrated Power over 

Ethernet (PoE)

Standards-based IEEE 802.3af

Radio specifications

Wireless medium

Direct-Sequence Spread Spectrum (DSSS), Orthogonal 

Frequency-Division Multiplexing (OFDM), and 2×3 Spatial 

Multiplexing (MIMO) with 2 spatial streams

Network standards

802.11a, 802.11b, 802.11g, 802.11n  

Channelization

20 MHz and 40 MHz channels

Packet aggregation

A-MSDU, A-MPDU

Interframe spacing

Reduced

MIMO power save

Static and Dynamic

Data rates supported

802.11a: 6, 9, 12, 18, 24, 36, 48, 54 Mbps 

802.11b/g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54 Mbps 

802.11n: MCS 0–15 up to 300 Mbps

Operating channels

5.0 GHz: all channels from 4920 MHz to 5825 MHz  

2.4 GHz: channels 1–13 (2412 to 2472 MHz); Channel 14  

(2484 MHz), Japan only  

Actual operating frequencies depend on national regulatory limits.

Operating bands

Federal Communications Commission (FCC) European Union, 

2.412 to 2.462 GHz; 2.412 to 2.472 GHz; 5.150 to 5.250 GHz

(UNII -1); 5.150 to 5.250 GHz; 5.725 to 5.825 GHz (UNII -3);

5.150 to 5.350 GHz; 5.725 to 5.850 (ISM); 5.470 to 5.725 GHz  

(Country-specific) Japan, 2.412 to 2.484 GHz;  

4.900 to 5.000 GHz; 5.150 to 5.250 GHz

Maximum available 

transmit power

24 dBm

Transmit power 

adjustment

1-dB increments

Antenna configuration

2×3 MIMO (transmit on two and receive on all three antennas)

Maximum radio transmit power

2400 MHz band

Single-antenna composite transmit power: +21 dBm 

Dual-antenna composite transmit power: +24 dBm

5200 MHz band

Single-antenna composite transmit power: +19 dBm

Dual-antenna composite transmit power: +22 dBm

Antenna specifications

Type

Integrated 2.4 GHz and 5.2 GHz dual antenna; elements with

diversity (internal antenna) 

Six RSMA connectors for external antennas (not included)

Band

2.4 to 2.5 GHz; 4.90 to 5.85 GHz (actual operating frequencies

depend on regulatory rules and certification agency)

Voltage Standing Wave 

Ratio (VSWR)

Less than 2:1 (internal antenna) 

Antenna-specific (external antenna)

Gain

2.4 GHz: 2 dBi; 5.0 GHz: 4.8 dBi (internal antenna) 

Antenna-specific (external antenna)

Regulatory information

Safety specifications

UL/cUL 60950-1, IEC/EN60950-1, UL2043 (Plenum), 

compliance with RoHS Directive 2002/95/EC TUV

EMC specifications

FCC (USA), Industry Canada, CE (Europe), EN 301 489-1,  

EN 301 489-17, EN60601-1-2, and TELEC (Japan)

Radio approvals

FCC (USA), Industry Canada, CE (Europe- EN 300.328,  

EN 301.893), TELEC (Japan)