ASUS RS724Q-E7/RS12 Benutzerhandbuch

Chapter 2:  Hardware setup

2-24

Follow the steps below to install the optional ASUS PIKE SAS RAID card to the 

ASUS PIKE riser card.

3.  Locate the two screws on the riser 

card bracket, then remove the 

screws from the bracket.

4.  Locate the two screw holes on the 

PIKE riser card.

2.  Firmly hold the riser card bracket, 

and then pull it up to detach it from 

the PCI Express x16 slot on the 

motherboard.

1.  Remove the three screws on the 

riser card bracket, as shown in the 

right figure.

5.  Secure the PIKE riser card to the 

riser card bracket with two screws.