ASUS TS300-E9-PS4 Betriebsanweisung

Chapter 2: Hardware Information

2-18

Ensure to unplug the power cable before installing or removing any system components.

Failure to do so may cause damage to the motherboard and other system components!

You must remove the front panel assembly before installing a 5.25-inch drive.

3.

Connect the SATA cable to the SATA

connector on the back of the drive.

4. 

Connect the 4-pin power connector from 

the power supply to the power connector 

on the back of the drive.

1. 

Unscrew and remove the metal cover of 

the bay where you want to install the 5.25-

inch drive.

2.

Insert the drive into the bay and slide the

bay lock to the right until it clicks in place.

The system comes with three 5.25-inch drive 

bays located on the upper front part of the

chassis. An optional optical drive occupies the 

uppermost bay (labeled 1). The lower bays

(labeled 2 and 3) are available for additional

5.25-inch drives or 5.25-inch to 3.5-inch hard 

drive adapter for installing 3.5-inch zip or floppy

disk drives.