ASUS TS500-E8-PS4 Betriebsanweisung

2-15

ASUS TS500-E8-PS4

Ensure to unplug the power cable before installing or removing any system components.

Failure to do so may cause damage to the motherboard and other system components!

You must remove the front panel assembly before installing a 5.25-inch drive.

1. 

Unscrew and remove the metal cover 

of the bay where you want to install the

5.25-inch drive, and take off the plastic

cover on the front bezel at the same

position.

2.

Insert the drive into the bay and slide

the bay lock to the right until it clicks in

place.

3.

Connect the SATA cable to the SATA

connector on the back of the drive.

4. 

Connect a power plug from the power 

supply to the power connector on the 

back of the drive.

The system comes with three 5.25-inch

drive bays located on the upper front part

of the chassis. An optical drive that comes

standard/optional with the system package

occupies the uppermost bay (labeled 1). The

lower bays (labeled 2 and 3) are available for

additional 5.25-inch optical, zip, or floppy disk

drives.