ASUS ASMB8-iKVM Betriebsanweisung

4-18

Chapter 4: Web-based User Interface

1. 

Click the Event Filter Tab to configure the event filters in the available slots

2. 

To Add an Event Filter entry, select a free slot and click Add to open the Add event 

Filter entry Page. A sample screenshot of Add Event Filter Page is in seen the 

screenshot below.

3. 

In the Event Filter Configuration section,

• 

PEF ID displays the ID for configured PEF entry (read-only).

• 

In filter configuration, check the box to enable the PEF settings.

• 

In Event Severity, select any one of the Event severity from the list.

4. 

In the Filter Action configuration section,

• 

Event Filter Action is a mandatory field and checked by default, which enable PEF 

Alert action (read-only).

• 

Select any one of the Power action either Power down, Power reset or Power 

cycle from the drop down list

• 

Choose any one of the configured alert policy number from the drop down list.

Alert Policy has to be configured - under Configuration->PEF->Alert Policy.

5. 

In the Generator ID configuration section,

• 

Check Generator ID Data option to fill the Generator ID with raw data.

• 

Generator ID 1 field is used to give raw generator ID1 data value.

• 

Generator ID 2 field is used to give raw generator ID2 data value.

In RAW data field, to specify hexadecimal value prefix with ‘0x’.