Canon imagePROGRAF iPF770 Handbuch
Hardware error. 03130031-2F7x (x is 0, 1, or 2)
Cause
Corrective Action
The ink tank is not
installed correctly.
installed correctly.
Turn off the power, remove and then reinstall all of the ink tanks, and then turn on the power.
If the same message is displayed again, write down the error code and message, turn off the printer, and contact
your Canon dealer for assistance.
If the same message is displayed again, write down the error code and message, turn off the printer, and contact
your Canon dealer for assistance.
Top cover is open.
Top cover is open.
Cause
Corrective Action
The printer has detected that the Top Cover is
open.
open.
Open the Top Cover fully, remove any foreign objects, and close the Top Cover
again.
again.
If the error occurs again, close the Top Cover, turn off the printer, and wait a while
before restoring power.
before restoring power.
Prepare for parts replacement.
Prepare for parts replacement.
Cause
Corrective Action
It is almost time to replace consumables for
which service is required.
which service is required.
If "Parts replacement time has passed." is displayed, you can continue to use the print-
er for some time.
Contact your Canon dealer for assistance.
er for some time.
Contact your Canon dealer for assistance.
Parts replacement time has passed.
Parts replacement time has passed.
Cause
Corrective Action
It is past the recommended time to replace consumables for which service is required. Contact your Canon dealer for assistance.
Unknown file.
Unknown file.
Cause
Corrective Action
Data sent to keep the printer up to date (such as paper
information) is in the wrong format.
information) is in the wrong format.
Check the data. Turn off the printer and wait a while before restoring power,
and then resend the data.
and then resend the data.
You have uploaded firmware for a different model.
Check the firmware version. Turn off the printer and wait a while before restor-
ing power, and then resend the firmware.
ing power, and then resend the firmware.
If the message is displayed again, contact your Canon dealer for assistance.
Multi-sensor error
Multi-sensor error
Cause
Corrective Action
Direct sunlight or strong lighting may be shining on the
printer and causing the sensor to malfunction.
printer and causing the sensor to malfunction.
Take steps to ensure the printer is not used when exposed to direct sunlight or
strong lighting.
strong lighting.
The performance of a sensor inside the printer may be
impaired.
impaired.
Turn off the printer and wait at least three seconds before restoring the power.
If the message is displayed again, contact your Canon dealer for assistance.
If the message is displayed again, contact your Canon dealer for assistance.
Error in cutter position.
Error in cutter position.
Cause
Corrective Action
The Cutter Unit stops in the middle of cutting.
1.
Push the Release Lever back and remove the paper.
2.
Pull the Release Lever forward.
iPF770
Top cover is open.
Error Message
Other Messages
627