Canon VB-M641V Handbuch
202
These settings will be applied at the panorama image capture start time and will revert back to their previous
settings once capture is completed.
(1)
[Exposure Lock]
The exposure for the selected position will be automatically adjusted and locked during capture.
The exposure for the selected position will be automatically adjusted and locked during capture.
(2)
[White Balance Lock]
The white balance for the selected position will be automatically adjusted and locked during capture.
The white balance for the selected position will be automatically adjusted and locked during capture.
(3)
[Focus Lock]
The focus for the selected position will be automatically adjusted and locked for the entire scene during
The focus for the selected position will be automatically adjusted and locked for the entire scene during
capture.
Capture starts and the panorama image is created.
To stop capture while underway, click [Cancel].
Note
• While a panorama image is being captured, the Image Stabilizer is temporarily disabled.
• The following users will be disconnected while creating a panorama image.
– All users except for administrators
– Users not connected via RTP
– Users not connected via RTP
• When a small value is entered for [Maximum Frame Rate: Video Transmission] (P. 73) in [Video Settings] > [JPEG] in the Setting
Page, panorama capture is slowed down.
Recapture a part of the image:
When you position the mouse pointer over the panorama image, a white grid appears.
If you right-click on a part of the image and select [Recapture] from the menu that appears, only that part of the
image will be recaptured.
1
If necessary, configure the [Exposure Lock], [White Balance Lock] and [Focus Lock] settings used when capturing
the panorama image.
2
Click [Start Panorama Creation].
3
Recapture the image if necessary.
(1)
(2)
(3)