Canon imageRUNNER ADVANCE 4245 Handbuch
12
●
How to Turn ON the Main Power
Make sure that the power plug is fi rmly inserted into the power outlet, and then turn ON the main power of the machine following the
procedure below.
procedure below.
1.
Open the main power switch cover.
2.
Press the main power switch to the “I” side.
3.
Close the main power switch cover.
1
2
3
Main Power and Energy Saver Key
This section describes how to use the main power switch and the Energy Saver key.
Do not connect or disconnect the power cord with wet hands, as this may result in electrical
shock.
shock.
• If you are using a login service, log in using the procedure for the login
service you are using.
• If you want to turn OFF the main power and then back ON again, wait for
at least 10 seconds after the main power indicator is turned OFF before
turning ON the main power. However, when [Quick Startup Settings for
Main Power] is enabled, if you don’t wait more than 20 seconds after the
Main Power indicator is turned OFF, quick startup is not performed.
turning ON the main power. However, when [Quick Startup Settings for
Main Power] is enabled, if you don’t wait more than 20 seconds after the
Main Power indicator is turned OFF, quick startup is not performed.
• If you set [Quick Startup Settings for Main Power] to ‘On’ in [Preferences]
(Settings/Registration), the tone sounds when turning ON the main power
of the machine. (Depending on the situations, the machine does not
startup quickly and the tone does not sound.)
of the machine. (Depending on the situations, the machine does not
startup quickly and the tone does not sound.)