Canon imageRUNNER ADVANCE 4245 Handbuch

 This section describes how to load paper. 

 

 

 If the selected paper runs out, or the selected paper drawer runs out of paper during printing, a screen prompting you to load 
paper appears on the touch panel display. 
 Follow the procedure below to load paper into the paper drawers. 
  

  

 

 

•   A screen prompting you to load paper also appears if the selected paper drawer is not fully inserted into the machine. Make 

sure that the paper drawer is properly in place. 

•   Do not load the following types of paper into the paper drawers. Doing so may cause a paper jam. 

•   Severely curled or wrinkled paper 
•   Thin straw paper 
•  

Transparencies 

•   Paper which has been printed on using a thermal transfer printer 
•   The reverse side of paper which has been printed on using a thermal transfer printer 

•   Make sure that you fan the sheets of paper well before placing them. Recycled paper, pre-punched paper, and heavy paper 

should be fanned particularly well before loading it. 

•   Never place paper or any other items in the empty part of the drawer next to the paper stack. Doing so may cause paper jams. 
•   When you are printing in the Staple mode, do not remove the output sheets that are waiting to be stapled. (Printing and 

stapling resume after you clear the paper jam.) 

  

 

 

•   Register the size and type of the loaded paper in [Paper Settings] in [Preferences] (Settings/Registration). 
•   You can use custom paper sizes. For more information, see e-Manual > Settings/Registration > Registering/Editing/Deleting 

Custom Paper Sizes. 

•   You can name, register, and edit custom paper types. For more information, see e-Manual > Settings/Registration > 

Registering/Editing Custom Paper Types. 

•   The following paper sizes can be loaded into Paper Drawers 1, 2, 3, and 4: 

•    Paper Drawer 1: LGL, LTR, LTRR, STMTR, EXEC, Custom (5 1/2” x 7 1/8” to 11 3/4” to 15 3/8” (139.7 mm x 182.0 mm to 297.0 mm x 390.0 mm)) 
•   Paper Drawers 2, 3, and 4: 11” x 17”, LGL, LTR, LTRR, STMTR, EXEC, Custom (5 1/2” x 7 1/8” to 11 3/4” x 17” (139.7 mm x 182.0 mm to 297.0 mm x 431.8 mm)) 
•   Envelopes can be loaded into Paper Drawer 2 only if the Envelope Feeder Attachment-D1 is attached. 
•   Paper Drawers 3 and 4 are available for use only if the Cassette Feeding Unit-AF1 is attached.  

•   For more information on the paper types that can be loaded in Paper Drawers 1, 2, 3, and 4, see e-Manual > Basic Operations. 
•   If a message prompting you to load paper appears during printing, the remaining prints are automatically made after you load 

the correct paper. If you select a diff erent paper drawer, the remaining prints are made after you press [OK]. 

•   Press [Cancel] to cancel printing.