Canon imageRUNNER ADVANCE 400iF Handbuch

Legal Notices    75

unit's telephone number, time, and date as described 
in Basic Operations or Settings/Registration in the 
e-Manual.

Preinstallation Requirements for Canon Facsimile 
Equipment

The fax function is available only if the FAX Board is 
installed.

A . Location
Supply a suitable table, cabinet, or desk for the 
machine. See "Specifications" in this guide for specific 
dimensions and weight.

B . Order Information
1.  A single telephone line (touch-tone or rotary) 

should be used. If the Super G3 2nd Line Fax Board 
is installed, a multi telephone line (touch-tone or 
rotary) can be used.

2.  Order a CA11A modular jack which should be 

installed by the telephone company. If the CA11A 
jack is not present, installation cannot occur.

3.  Order a normal business line from your telephone 

company's business representative. The line should 
be a regular voice grade line or an equivalent one. 
Use one line per unit. If the Super G3 2nd Line Fax 
Board is installed, you can use a multi-line.

DDD (Direct Distance Dial) line 
 
or 
 
IDDD (International Direct Distance Dial) line if you 
communicate overseas

Canon recommends an individual line following 
industry standards, i.e., 2500 (touch-tone) or 500 
(rotary/pulse dial) telephones. A dedicated extension 
off a PBX (Private Branch eXchange) unit without "Call 
Waiting" can be used with your facsimile unit. Key 
telephone systems are not recommended because 
they send nonstandard signals to individual 
telephones for ringing and special codes, which may 
cause a facsimile error.

C . Power Requirements
The power outlet should be a three-prong grounded 
receptacle (Single or Duplex). It should be independent 
from copiers, heaters, air conditioners, or any electric 
equipment that is thermostatically controlled. The 
rated value is 115 volts and 15 amperes. The CA11A 
modular jack should be relatively close to the power 
outlet to facilitate installation.

This product meets the applicable Industry Canada 

•

technical specifications.
Before installing this equipment, users should 

•

ensure that it is permissible to be connected to the 
facilities of the local telecommunications company. 
The equipment must also be installed using an 
acceptable method of connection. In some cases, 
the company's inside wiring associated with a 
single line individual service may be extended by 
means of a certified connector assembly (telephone 
extension cord). The customer should be aware 
that compliance with the above conditions may not 
prevent deterioration of service in some situations.
The Ringer Equivalence Number is an indication 

•

of the maximum number of devices allowed to be 
connected to a telephone interface. The termination 
of an interface may consist of any combination of 
devices subject only to the requirement that the sum 
of the RENs of all the devices does not exceed five.
The REN of this product is 1.0.

•

Repairs to certified equipment should be made 

•

by an authorized Canadian maintenance facility 
designated by the supplier. Any repairs or alterations 
made by the user to this equipment, or equipment 
malfunctions, may give the telecommunications 
company cause to request the user to disconnect the 
equipment.
Users should ensure for their own protection that 

•

the electrical ground connections of the power 
utility, telephone lines, and internal metallic water 
pipe system, if present, are connected together. This 
precaution may be particularly important in rural 
areas.

This equipment complies with the Canadian ICES-003 
Class A limits.

Conditions à Remplir Préalablement à L'installation 
d'un Télécopieur Canon

La fonction de Fax est disponible uniquement 
lorsqu'une carte FAX est installee.

A . Emplacement
Prévoir une table, un meuble, ou un bureau 
suffisamment solide et de taille appropriée (voir 
"Spécifications" pour les indications de poids et