Canon imagePROGRAF iPF510 Handbuch

Seite von 724
Handling sheets
7.
After the following message is displayed, close the Top Cover.
Close UpperCover
8.
After the following message is displayed, press the OK button.
Load Front Tray
Press OK
The paper is held between the Platen and Back Cover as it is fed.
Ofine
Loading..
After the paper is advanced and the printer goes online, printing starts automatically.
If no print job was received beforehand, the printer enters Standby mode.
9.
Pull out the Output Tray Extension.
10.
After printing, the printer will temporarily stop advancing the paper while the trailing edge is still in
the rollers to prevent the sheet from dropping. Press the ▲ button to release the sheet. After
pulling it straight out, press the ▼ button. (→P.168)
Note
Remove the printed document on the Output Tray after printing from the Front Paper Feed Slot. If
you print while a document is still there, the Front Tray Guides may become caught inside the Front
Paper Feed Slot. (→P.653)
Handling Paper 165