Canon imagePROGRAF iPF830 Handbuch
Cause
Corrective Action
When Detect Mismatch in the Control Pan-
el menu is set to Pause, the type of paper
loaded does not match the type specified in
the printer driver.
el menu is set to Pause, the type of paper
loaded does not match the type specified in
the printer driver.
2.
Change the paper type setting in the printer driver to the type loaded in the printer
and try printing again.
and try printing again.
Follow these steps to ensure the paper type matches on the printer and in the printer
driver.
driver.
1.
Press ▲ or ▼ to select Change Paper, and then press the OK button.
2.
Replace the loaded paper with paper of the type and size you have specified in
the printer driver.
(See "
the printer driver.
(See "
Press ▲ or ▼ to select Print, and then press the OK button to resume printing.
However, note that this error may cause paper jams and affect the printing quality.
However, note that this error may cause paper jams and affect the printing quality.
The paper is too small.
The paper is too small.
Cause
Corrective Action
When Detect Mismatch in the Control Panel
menu is set to Pause or Hold Job, paper
smaller than the size specified in the printer
driver is loaded.
menu is set to Pause or Hold Job, paper
smaller than the size specified in the printer
driver is loaded.
Press ▲ or ▼ to select Print, and then press the OK button to resume printing.
However, note that this error may cause paper jams and affect the printing quality.
However, note that this error may cause paper jams and affect the printing quality.
Adjust the paper size setting in the printer driver to match the size loaded in the
printer as follows.
printer as follows.
1.
Press ▲ or ▼ to select Stop Printing, and then press the OK button.
2.
Change the paper size setting in the printer driver to the size loaded in the
printer and try printing again.
printer and try printing again.
Replace the loaded paper with paper of a size that matches the size setting in the
printer driver as follows.
printer driver as follows.
1.
Press ▲ or ▼ to select Change Paper, and then press the OK button to stop
printing.
printing.
2.
When Detect Mismatch in the Control Panel
menu is set to Warning, paper smaller than the
size specified in the printer driver is loaded.
menu is set to Warning, paper smaller than the
size specified in the printer driver is loaded.
You can continue to print, but note that this error may cause problems in the print-
ing results.
ing results.
The paper is too small.
The paper is too small.
"Replace paper with A4/LTR (vertical) or larger"
Cause
Corrective Action
The loaded paper is too small.
(When you have attempted to print a test
print sheet or other printer status informa-
tion.)
(When you have attempted to print a test
print sheet or other printer status informa-
tion.)
Replace the paper with paper of A4/Letter (vertical) size or larger as follows.
1.
2.
Switch to paper A4/Letter (vertical) or larger.
(See "
(See "
The printer will resume printing.
Press ▲ or ▼ to select Stop Printing, and then press the OK button.
PaprWidth Mismatch
PaprWidth Mismatch
Cause
Corrective Action
When Detect Mismatch in the Control Panel menu is
set to Pause or Hold Job, the width of the loaded roll
does not match the width specified in Fit Roll Paper
Width in the printer driver.
set to Pause or Hold Job, the width of the loaded roll
does not match the width specified in Fit Roll Paper
Width in the printer driver.
Press ▲ or ▼ to select Print, and then press the OK button to resume
printing.
However, note that this error may cause paper jams and affect the printing
quality.
printing.
However, note that this error may cause paper jams and affect the printing
quality.
iPF850
The paper is too small.
Error Message
Messages regarding paper
655