Canon VB-M641VE Handbuch
166
(3)
[Use One-shot AF]
This is the factory default setting. Select this to use One-shot AF when switching Day/Night Mode.
This is the factory default setting. Select this to use One-shot AF when switching Day/Night Mode.
(4)
[Move to registered focus position]
When switching Day/Night Mode, the focus positions preregistered for Day Mode and Night Mode in [Register focus
position] will be used. For details, please refer to “Register the Focus Positions” that follows.
(5)
[Compensate for light source]
Select this option to adjust the focus position to suit the lighting being used when switching to Night Mode.
Select this option to adjust the focus position to suit the lighting being used when switching to Night Mode.
[Fluorescent]
Select this option to capture video under fluorescent, LED, sodium or mercury lighting.
Select this option to capture video under fluorescent, LED, sodium or mercury lighting.
[Halogen Lamp]
Select this option to capture video under halogen or incandescent lighting.
Select this option to capture video under halogen or incandescent lighting.
[Infrared (740nm)]
Select this option to capture video under infrared (740 nm wavelength) illumination.
Select this option to capture video under infrared (740 nm wavelength) illumination.
[Infrared (850nm)]
Select this option to capture video under infrared (850 nm wavelength) illumination.
Select this option to capture video under infrared (850 nm wavelength) illumination.
[Infrared (940nm)]
Select this option to capture video under infrared (940 nm wavelength) illumination.
Select this option to capture video under infrared (940 nm wavelength) illumination.
(6)
[None]
When switching Day/Night Mode, the camera automatically focuses on each of the fluorescent lighting focus positions
When switching Day/Night Mode, the camera automatically focuses on each of the fluorescent lighting focus positions
set beforehand for Day Mode and Night Mode.
Registering the Focus Positions
These are the steps to register the focus positions to use when switching Day/Night Mode mentioned in (4) earlier.
Important
When using [Use One-shot AF] and switching between Day/Night Mode, it may not be possible to focus on the intended subject if
another subject, such as a person, passes in front at that time.
another subject, such as a person, passes in front at that time.
M641 M640 M741 M740
(3)
(4)
(5)
R11
R10
(3)
(4)
(6)
M641 M640 M741 M740
R11
R10
1
Display the [Day/Night Mode Focus Settings] panel.
2
Select [Day Mode] in Day/Night Mode (P. 165).