Canon VB-M641VE Handbuch
Admin Viewer/VB Viewer
5
175
Note
If one of [Smart Shade Control], [Haze compensation], [Exposure], or [Infrared] (VB-M741LE) is selected, all four will be selected
automatically.
However, the following combinations cannot be configured.
automatically.
However, the following combinations cannot be configured.
– [Exposure] cannot be set to [Manual] and [Smart Shade Control] cannot be set to [Auto] at the same time.
– [Smart Shade Control] cannot be used if [Haze Compensation] is set to [Auto] or a manual setting ([1] to [7]).
– [Haze Compensation] cannot be used if [Smart Shade Control] is set to [Auto] or a manual setting ([1] to [7]).
– When [Exposure] is set a value other than [Manual], [Infrared] cannot be set to [Level].
– [Smart Shade Control] cannot be used if [Haze Compensation] is set to [Auto] or a manual setting ([1] to [7]).
– [Haze Compensation] cannot be used if [Smart Shade Control] is set to [Auto] or a manual setting ([1] to [7]).
– When [Exposure] is set a value other than [Manual], [Infrared] cannot be set to [Level].
(5)
[Get camera info]
The current video display area camera angle and camera settings will be loaded into the [Advanced Preset
Settings] panel.
Use this to apply changes in the camera angle and settings to the preset.
(6)
[Preview]
Click this to have the settings in the [Advanced Preset Settings] panel applied to the video display area.
Click this to have the settings in the [Advanced Preset Settings] panel applied to the video display area.
(7)
[Restore settings]
If you previewed incorrect settings, etc., click this to revert to the settings registered in the camera.
If you previewed incorrect settings, etc., click this to revert to the settings registered in the camera.
(8)
[Save settings]
Registers the settings in the [Advanced Preset Settings] panel.
The edited preset settings are saved to the camera.
If you configure preset settings, be sure to save them to the camera using [Save settings].
Context Menu
If you right-click on a preset in the preset list, the following menu appears.
[Preview]
The settings for the preset you right-clicked on are reflected in the video display area.
The settings for the preset you right-clicked on are reflected in the video display area.
[Copy]
The settings for the preset you right-clicked on are copied.
The settings for the preset you right-clicked on are copied.
[Paste]
Copied preset settings are applied to the preset you right-clicked on.
Copied preset settings are applied to the preset you right-clicked on.
[Quick Registration]
Registers the settings selected in [Items to Reg.] in presets (P. 172).
Registers the settings selected in [Items to Reg.] in presets (P. 172).
[Delete]
The preset you right-clicked on is deleted. [Home] (home position] cannot be deleted.
The preset you right-clicked on is deleted. [Home] (home position] cannot be deleted.
Note
The available menu items change depending on the preset you right-click on.
Important
If [Manual] is selected in Focus Mode, manually adjust the focus while checking the actual video in the video display area. After
the focus has been adjusted, set the focus using [Get camera info]. Click [Save settings] to save the focus settings.
the focus has been adjusted, set the focus using [Get camera info]. Click [Save settings] to save the focus settings.
4
Click [Save settings].
M741