Canon HJ18ex7.6B Series Handbuch
E155
5. Operation in Analog Mode
5.1.3 Specifying Auto Iris Gain
[IG]
Although this value is factory-set, it can be adjusted as needed.
To adjust the value, use either the auto iris gain adjustment trimmer (refer to the Lens Manual) or display operations.
Regardless of the method of adjustment used, the most recent setting takes precedence.
The same auto iris gain value applies to all users.
To adjust the value, use either the auto iris gain adjustment trimmer (refer to the Lens Manual) or display operations.
Regardless of the method of adjustment used, the most recent setting takes precedence.
The same auto iris gain value applies to all users.
Options
01
to
99
Description
Minimum gain
Maximum gain
Default: Varies depending on the factory-set value, but corresponds to the value determined with the iris gain adjustment trimmer.
MENU
IG: 50
or
IG: 50
IG: 50
IG: 51
IG: 51
MENU
IG: 50
[ Basic ]
IG:50
MENU
MENU
[ Basic ]
IG:51
MENU
MENU
[ Basic ]
Note: Do the following when
adjusting gain while checking
iris operation.
iris operation.
→ Confi rm that the drive unit A/M
switch is set to [Auto] mode.
→ Set the camera iris mode to
[Auto].
Note: As you look at the lens iris
ring, set it to the position of
maximum gain at which “focus
hunting” does not occur.
maximum gain at which “focus
hunting” does not occur.
1
2
3
4
Press
.
Your selection is now highlighted.
Press
.
The display starts blinking.
Press
or
.
Press left or right until you reach the desired value.
Press
.
The display changes from blinking to highlighted, indicating confi rmation.
Initial Top Screen