Olympus MAUSB-300 Verweishandbuch

Before removing a card, close all software programs that are using data on the card (e.g. Explorer, image
viewing software), then follow the steps below.

● If you do not follow the steps below, the data on the card may be damaged.

● DO NOT apply force to the computer’s USB port or the adapter when removing/inserting a card from/into

the adapter if it is directly connected to the computer’s USB port.

1. Double-click [My Computer] on the desktop.

2. Right-click the corresponding [Removable

Disk] icon, then click [Eject] in the pop-up
menu.

● The card will not be ejected when [Eject] is clicked

in this step.

3. Make sure that the status lamp is NOT on.

4. Pull the card out of the card slot as shown.

Before disconnecting the adapter from the computer, close all software programs that are using data on the card
(e. g. Explorer, image viewing software), then follow the steps below.

1. If a card is inserted in the adapter, follow steps 1 - 3 in “3  Removing the card”.

2. Make sure that the status lamp is NOT on.

3. Unplug the adapter from the computer’s USB port.

● You can unplug the adapter with the computer’s power on. (You do not need to turn off the computer, restart it, or put

it in the sleep mode.)

• NEVER pull the card out of the card slot or

unplug the adapter from the computer while
the status lamp is blinking. Doing so may
destroy the data on the card or the card itself,
or cause the computer to malfunction.

Status lamp