Olympus MAUSB-300 Verweishandbuch
8
<98/98SE
Install>
4. When the device driver installation is complete,
the window at right appears. Select [Yes,I want to
restart my computer now.] if you are ready, then
click [OK].
restart my computer now.] if you are ready, then
click [OK].
● The computer restarts.
The device driver is now installed.
Once the device driver has been installed, the adapter will be recognized automatically whenever it is plugged
into the computer.
Once the device driver has been installed, the adapter will be recognized automatically whenever it is plugged
into the computer.
1. Disconnect the adapter from the computer
(
p. 11).
2. Click the [Cancel] button.
3. Follow the instructions in “2 Download and
install the device driver” (
p. 7).
If the [Add New Hardware Wizard] window appears before installing the device driver
If you connect the adapter to the computer before
installing the device driver, the [Add New Hardware
Wizard] window appears. In this case, follow the
steps below.
installing the device driver, the [Add New Hardware
Wizard] window appears. In this case, follow the
steps below.
1
Inserting a card
<98/98SE
Operation>
Insert a card into the adapter.
Make sure the card is level and that the gold-colored contact area is facing down. Insert the card all the way
into the card slot.
Make sure the card is level and that the gold-colored contact area is facing down. Insert the card all the way
into the card slot.
Operating the adapter
The operating procedures for the adapter under Windows 98/98SE are described below.
Notes
• Make sure that the card is facing the right
way.
• DO NOT insert the card at an angle.
Forcing a card in diagonally may damage
the adapter and/or the card.
the adapter and/or the card.
Card slot
xD-Picture Card
Adapter
Status lamp