Olympus PT-EP12 Gebrauchsanleitung
EN 17
EN
4. Connecting the underwater flash
To connect the underwater flash (optional) to the Case using an underwater optical fiber cable (optional:
PTCB-E02), follow the procedures below.
PTCB-E02), follow the procedures below.
Setting of the digital camera
Set the RC mode of the camera to ON so that the camera's built-in flash is activated.
In the case of flash with the RC mode, turn the RC mode to ON.
For details, refer to the instruction manual of the flash.
For details, refer to the instruction manual of the flash.
In case of UFL-1, plug the optical fiber cable in the same way.
Turn the RC mode of the camera to OFF.
Turn the RC mode of the camera to OFF.
Connecting the underwater optical fiber
cable
cable
1 Put the underwater optical fiber cable plug into
the optical fiber cable insertion slot.
Insert firmly until it stops next to the flash window
cover.
Insert firmly until it stops next to the flash window
cover.
2 Put the cap to the optical fiber cable insertion slot
when not in use.
PT-EP12_EN.Book Page 17 Thursday, June 5, 2014 7:14 PM