Netgear WNDAP620 – ProSAFE 3x3 Single Radio, Dual Band Wireless-N Access Point Verweishandbuch

Click Apply to save your settings.

Configure the Optional DHCPv6 Server

The wireless access point provides a built-in DHCPv6 server for wireless clients only, which 
can be especially useful in small networks. When the DHCP server is enabled, the wireless 
access point provides preconfigured TCP/IP configurations to all connected wireless 
stations.

For information about how to configure the DHCPv4 server, see 



Select Configuration > IP > DHCP Server Settings. The DHCP Server Settings screen 
displays. The following figure displays the DHCPv6 server settings only. For information 
about the DHCPv6 server settings, see 

Default Gateway

Enter the IPv6 address of the ISP gateway to which the wireless access point 
connects.

Dynamic IPv6 Address

The dynamic IPv6 address that is assigned by the DHCPv6 server on your 
network. This address does not overwrite the address in the IPv6 Address field.

Primary DNS Server

Enter the IP address of the primary and secondary DNS servers. 

A DNS server is a host on the Internet that translates Internet names (such as 

www.netgear.com) to numeric IP addresses. Typically your ISP transfers the IP 
address of one or two DNS servers to your wireless access point during login. If 
the ISP does not transfer an address, you need to obtain it from the ISP and 
enter it manually in this field. 

Secondary DNS Server

Network Integrity Check

Select this check box to validate that the upstream link is active before allowing 
wireless associations. Ensure that the default gateway is configured.