Netgear GSM7224v2 - 24-Port Layer 2 Managed Gigabit Switch Benutzerhandbuch
264
|
Chapter 4. Routing
ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual
RIP Status
Table 26.
Field
Description
Interface
Displays the interface for which data is configured.
IP Address
Displays the IP Address of the router interface.
Send Version
Displays the version of RIP control packets the
interface should send from the pull-down menu. The
value is one of the following:
interface should send from the pull-down menu. The
value is one of the following:
•
RIP-1 - send RIP version 1 formatted packets via
broadcast.
•
RIP-1c - RIP version 1 compatibility mode. Send
RIP version 2 formatted packets via broadcast.
•
RIP-2 - send RIP version 2 packets using
multicast. The default is RIP-2.
•
None: no RIP control packets will be sent.
Receive Version
Displays what RIP control packets the interface will
accept from the pull-down menu. The value is one of
the following:
accept from the pull-down menu. The value is one of
the following:
•
RIP-1 - accept only RIP version 1 formatted
packets.
•
RIP-2 - accept only RIP version 2 formatted
packets. The default is RIP-2.
•
Both - accept packets in either format.
•
None - no RIP control packets will be accepted.
Admin Mode
Enables RIP for an interface. The default is Disable.
Link State
Indicates whether the RIP interface is up or down.
Bad Packets Received
The number of RIP response packets received by
the RIP process which were subsequently discarded
for any reason.
the RIP process which were subsequently discarded
for any reason.
Bad Routes Received
The number of routes, in valid RIP packets, which
were ignored for any reason (e.g., unknown address
family, or invalid metric).
were ignored for any reason (e.g., unknown address
family, or invalid metric).
Updates Sent
The number of triggered RIP updates actually sent
on this interface. This explicitly does NOT include full
updates sent containing new information.
on this interface. This explicitly does NOT include full
updates sent containing new information.
Click REFRESH to show the latest RIP information.