Netgear GSM7224v2 - 24-Port Layer 2 Managed Gigabit Switch Benutzerhandbuch
438
|
Chapter 6. Managing Device Security
ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual
Accounting Server Configuration
Use the RADIUS Accounting Server Configuration page to view and configure various
settings for one or more RADIUS accounting servers on the network.
settings for one or more RADIUS accounting servers on the network.
To access the RADIUS Accounting Server Configuration page, click Security
Management
Security
RADIUS
Accounting Server Configuration.
To configure the RADIUS accounting server:
1.
In the Accounting Server IP Address field, specify the IP address of the RADIUS
accounting server to add.
accounting server to add.
2.
In the Accounting Server Name field, enter the Name of the accounting server to add.
3.
In the Port field, specify the UDP port number the server uses to verify the RADIUS
accounting server authentication. The valid range is 0–65535. If the user has READONLY
access, the value is displayed but cannot be changed.
accounting server authentication. The valid range is 0–65535. If the user has READONLY
access, the value is displayed but cannot be changed.
4.
From the Secret Configured menu, select Yes to add a RADIUS secret in the next field.
You must select Yes before you can configure the RADIUS secret. After you add the
RADIUS accounting server, this field indicates whether the shared secret for this server has
been configured.
You must select Yes before you can configure the RADIUS secret. After you add the
RADIUS accounting server, this field indicates whether the shared secret for this server has
been configured.
5.
In the Secret field, type the shared secret to use with the specified accounting server.
6.
From the Accounting Mode menu, enable or disable the RADIUS accounting mode.
7.
To delete a configured RADIUS Accounting server, click Delete.