Netgear GSM7224v2 - 24-Port Layer 2 Managed Gigabit Switch Benutzerhandbuch

To display the UDP Relay Interface Configuration page, click System > Services > UDP 
Relay> UDP Relay Interface Configuration. A screen similar to the following displays.

Use Interface to select an Interface to be enabled for the UDP Relay.

Use Server Address to specify the UDP Relay Server Address in x.x.x.x format.

Use UDP Port to specify UDP Destination Port. The following ports are supported:

DefaultSet - Relay UDP port 0 packets. This is specified if no UDP port is selected 

when creating a Relay server.

dhcp - Relay DHCP (UDP port 67) packets.

domain - Relay DNS (UDP port 53) packets.

isakmp - Relay ISAKMP (UDP port 500) packets.

mobile-ip - Relay Mobile IP (UDP port 434) packets

nameserver - Relay IEN-116 Name Service (UDP port 42) packets

netbios-dgm - Relay NetBIOS Datagram Server (UDP port 138) packets

netbios-ns - Relay NetBIOS Name Server (UDP port 137) packets

ntp - Relay network time protocol (UDP port 123) packets.

pim-auto-rp - Relay PIM auto RP (UDP port 496) packets.

rip - Relay RIP (UDP port 520) packets

tacacs - Relay TACACS (UDP port 49) packet

tftp - Relay TFTP (UDP port 69) packets

time - Relay time service (UDP port 37) packets

Other - If this option is selected, the UDP Port Other Value is enabled. This option 

permits the user to enter their own UDP port in UDP Port Other Value.

Use UDP Port Other Value to specify UDP Destination Port that lies between 0 and 65535.