Netgear DC112A – AirCard Smart Cradle Benutzerhandbuch
Internet Setup
34
AirCard Smart Cradle
•
Auto. Your cradle uses any remote relay gateway that is available on the Internet.
This is the default setting.
This is the default setting.
•
Static IP Address. Enter the static IPv4 address of the remote relay gateway. Your
IPv6 ISP usually provides this address.
IPv6 ISP usually provides this address.
7.
Select an IP Address Assignment radio button:
•
Use DHCP Server. This method passes more information to LAN devices but some
IPv6 systems might not support the DHCv6 client function.
IPv6 systems might not support the DHCv6 client function.
•
Auto Config. This is the default setting.
This setting specifies how the cradle assigns IPv6 addresses to the devices on your
home network (the LAN).
home network (the LAN).
8.
(Optional) Select the Use This Interface ID check box and specify the interface ID to be
used for the IPv6 address of the cradle’s LAN interface.
used for the IPv6 address of the cradle’s LAN interface.
If you do not specify an ID here, the cradle generates one automatically from its MAC
address.
address.
9.
Click the Apply button.
Your settings are saved.
Set Up an IPv6 Pass Through Internet Connection
In pass-through mode, the cradle works as a Layer 2 Ethernet switch with two ports (LAN and
WAN Ethernet ports) for IPv6 packets. The cradle does not process any IPv6 header
packets.
WAN Ethernet ports) for IPv6 packets. The cradle does not process any IPv6 header
packets.
Note:
To use a docked mobile hotspot with IPv6 data connection, the IPv6
Internet connection type should be set as pass through. Before you
set up this connection, see
Internet connection type should be set as pass through. Before you
set up this connection, see
is implemented.
To set up a pass-through IPv6 Internet connection:
1.
Launch a web browser from a computer or wireless device that is connected to the
Smart Cradle.
Smart Cradle.
2.
In the address field of the browser, enter http://netgear.cradle or http://192.168.100.1.
A login prompt displays.
3.
Enter the cradle user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
password are case-sensitive.
The BASIC Home screen displays.