Netgear EX6920 – AC1200-WiFi Range Extenders Benutzerhandbuch
Maintain and Monitor the Extenders
42
AC1200 WiFi Range
Extenders
A confirmation pop-up window opens.
9.
Confirm your decision.
The extender configuration is restored and the extender restarts. This process takes
about one minute.
about one minute.
Return an Extender to Its Factory Default Settings
Under some circumstances (for example, if you lose track of the changes that you made to
the extender settings), you might want to erase the configuration and reset the extender to its
factory default settings.
the extender settings), you might want to erase the configuration and reset the extender to its
factory default settings.
To reset the extender to factory default settings, you can either use the Factory Reset button
on the side panel or log in to the extender and reset it.
on the side panel or log in to the extender and reset it.
For a list of factory default settings, see
50.
To use the Factory Reset button to return the extender to factory default settings:
CAUTION:
This process erases any settings that you configured in the extender.
1.
Insert a straightened paper clip into the hole of the Factory Reset button and hold it for
about seven seconds.
Factory Reset button
2.
Release the button.
CAUTION:
Do not try to go online, turn off the extender, shut down the computer, or
do anything else to the extender until it finishes restarting.
do anything else to the extender until it finishes restarting.