KitchenAid 36'' Island-Mount 400 CFM Canopy Hood, Architect® Series II Installationsanleitung

Seite von 28
11
Non-Vented (recirculating) Installation Filters:
The charcoal filter is not washable. It should last up to 6 months 
with normal use. Replace with Charcoal Filter Kit Number 
W10412939.
To replace charcoal filter:
1. Remove metal grease filter from range hood. See “Metal 
Grease Filter” in this section.
2. Bend spring clips away from metal grease filter. 
3. Place charcoal filter into top side of metal filter.
4. Bend spring clips back into place to secure the charcoal filter 
to the metal filter. 
5. Replace metal grease filter. See “Metal Grease Filter” in this 
section.
Replacing a Halogen Lamp
Turn off the range hood and allow the halogen lamp to cool. To 
avoid damage or decreasing the life of the new lamp, do not 
touch lamp with bare fingers. Replace lamp, using tissue or 
wearing cotton gloves to handle lamp.
If new lights do not operate, make sure the lamps are inserted 
correctly before calling service.
1. Disconnect power.
2. Use a flat-blade screwdriver and gently pry the light cover 
loose.
3. Remove the lamp and replace with a 120-volt, 40-watt 
maximum, halogen lamp made for a G-9 base.
4. Replace the light cover.
5. Reconnect power.