KitchenAid 36-Inch 4-Burner with Steam-Assist Oven, Dual Fuel Freestanding Range, Commercial-Style Installationsanleitung
21
Reinstall Kick Plate
1. Align shoulder screw mounting holes with shoulder screws
on range.
2. Push kick plate down against front of range until the top
screw holes are aligned with the mounting holes on the front
of the range.
3. Reattach screws to the top of the kick plate.
Complete Installation
1. Check that all parts are now installed. If there is an extra part,
go back through the steps to see which step was skipped.
2. Check that you have all of your tools.
3. Dispose of/recycle all packaging materials.
4. For oven use and cleaning, read the Use and Care Guide.
3. Dispose of/recycle all packaging materials.
4. For oven use and cleaning, read the Use and Care Guide.
Check Operation of Oven(s)
1. Turn power ON.
2. Start a Bake cycle. See the Use and Care Guide for
2. Start a Bake cycle. See the Use and Care Guide for
operating instructions.
If oven(s) does not operate, check the following:
If oven(s) does not operate, check the following:
■
Household fuse is intact and tight or circuit breaker
has not tripped.
■
Electrical supply is connected.
■
See the “Troubleshooting” section in the Use
and Care Guide.
3. When oven has been on for 10 to 15 minutes, open the oven
door and feel for heat.
If you do not feel heat or if an error code (“F” followed by
If you do not feel heat or if an error code (“F” followed by
a number plus “E” followed by a number) appears in the
display, turn off the oven and contact a qualified technician.
4. Touch OFF.
To set the clock and other oven functions, refer to the Use
To set the clock and other oven functions, refer to the Use
and Care Guide.
If you need Assistance or Service:
Please reference the “Assistance or Service” section of the
If you need Assistance or Service:
Please reference the “Assistance or Service” section of the
Use and Care Guide or contact the dealer from whom you
purchased your range.
A
B
D
C
A. Kick plate
B. Reattach these screws.
C. Top screw hole
D. Shoulder screw mounting hole
B. Reattach these screws.
C. Top screw hole
D. Shoulder screw mounting hole