Xerox XEScan Solution Installationsanleitung

19.  Make sure the XEScan Application is not open.  Open the

Diagnostic Application and select Utilities.

20.  Press the browse button and browse to and select the Feature

Key File that was saved in Step 12.

21.  Press the Begin Feature Key Update button.  This brings up the

“Feature Key Update” dialog box.  Click “Start” to begin the
update.

22.  When the update is complete a “Feature Key Update

Complete” dialog box will be displayed indicating that a scanner
power cycle should be performed.  Power off the scanner and
then power it back on.  When the scanner has been powered
up and a “P” is displayed on the rear of the scanner, click “OK”
in the Feature Key Update Complete window.

23.  An “Initializing” dialog box appears stating “waiting for the

Scanner to initialize”.

24.  When initialization is complete a “Feature Key Status” dialog

box appears specifying the status of the Feature Keys.  Verify
the status of the recently installed Feature Key.

25.  Open the XEScan Solution application and perform a scan to

ensure that the new feature is now enabled.

26.  Store the feature key diskette in a safe place, together with

your other drivers and firmware diskettes and CD’s.