Xerox Xerox 6050A Wide Format Solution Betriebsanweisung
AccXES Client Tools User Guide
61
Title Block - Click on this list box to select the location for the title block.
Intelligent Title Block - (If you are accessing a printer that is using an
AccXES Firmware version of 9.0 or greater.)
For folding documents with title blocks in standard corners: Check the
Intelligent Title Block box to adjust the location of the title block so that it is
visible once the document is folded.
For folding documents with title blocks that are not in an expected standard
corner: Leave the Intelligent Title Block box unchecked.
AccXES Firmware version of 9.0 or greater.)
For folding documents with title blocks in standard corners: Check the
Intelligent Title Block box to adjust the location of the title block so that it is
visible once the document is folded.
For folding documents with title blocks that are not in an expected standard
corner: Leave the Intelligent Title Block box unchecked.
NOTE: To determine the document orientation and title block location, select
a document in the DST list. Select Document > Orientation Plot, or right
click and select from the popup menu. The print job will contain factory
default settings for job and document options except Auto Rotation will be
turned off and Rotation will be set to 0. Media Size will be set to 36 inches.
a document in the DST list. Select Document > Orientation Plot, or right
click and select from the popup menu. The print job will contain factory
default settings for job and document options except Auto Rotation will be
turned off and Rotation will be set to 0. Media Size will be set to 36 inches.
A brief description of the finisher program is given in a window at the bottom of
the Finishing Tab. The following check boxes report the operations included in
the finisher program for a selected Folding Method. Each check box will only
be enabled if the selected finisher program supports the associated option.
the Finishing Tab. The following check boxes report the operations included in
the finisher program for a selected Folding Method. Each check box will only
be enabled if the selected finisher program supports the associated option.
Cross Fold - When this box contains a mark, the finisher program
includes the first fold only option.
includes the first fold only option.
Margin - When this box contains a mark, a margin is included in the
finisher program.
finisher program.
Punch - When this box contains a mark, punching is included in the
finisher program.
finisher program.
Tab/Reinforcing - When this box contains a mark, a tab or reinforcing
strip is included in the finisher program.
strip is included in the finisher program.