Xerox Xerox 8830 Digital Solution with AccXES Controller serial number CNG Merkblatt

Note: You must enter a password on the WebPMT Session Setup window to
enable the features.

1.  Verify that the Optional License(s) is/are present.

a.  Print a Printer Configuration Test Print (Minimal) (see Figure 5) or on the

WebPMT click PRINTER DEFAULTS > UTILITIES > Feature Configuration.
(See Figure 6.)

b.  Verify that the feature is enabled:

•

 

Color license is located under the SCANNER CONFIGURATION.

•

 

Check in the OPTIONAL CONTROLLER FEATURES section.
“Present” should appear opposite the feature license that was
installed.

•

 

Select PRINTER DEFAULTS > UTILITIES > CONFIGURATION >
Feature Configuration. “Present” should appear opposite the feature
license that was installed.

2.  Enable the Features using the WebPMT.

•

 

Accounting Feature: Click on ACCOUNTING.  In the Accounting Mode
box, click “Enable”. For information on using Accounting, refer to the
AccXES Account Manager Tool Administrator User Guide.

•

 

Copy Enable and Scan To Net Enable: Click PRINTER DEFAULTS >
PRINTER SETUP. “DDS enable” needs to be selected.  If not, select it,
wait 1 minute, and reboot the entire system.

•

 

Click on UTILITIES > CONFIGURATION >Feature Configuration.  Look at
the “State” column to verify that the Feature is enabled.