Xerox 4213 MICR MRP Betriebsanweisung
DATASTREAM COMMANDS
Note: For the 3287 and 4045 Model 20 emulations, this
command is not supported and causes a line feed.
command is not supported and causes a line feed.
All values, except channel one, must be specified before use;
otherwise, the VCS command is treated as a Line feed. If the
channel selected is less than or equal to the current page
position, the print position moves to the correct line on the next
page.
otherwise, the VCS command is treated as a Line feed. If the
channel selected is less than or equal to the current page
position, the print position moves to the correct line on the next
page.
Vertical Tab (VT) (coax only)
X'0B'
Moves the print position vertically down to the next tab stop
setting, which is set by the Set Vertical Format command. If no
vertical tab stops are below the current print position, a vertical
tab results in a line feed. If a vertical tab is requested with the
print position below the bottom margin, it results in a move to
the top margin of the next page.
setting, which is set by the Set Vertical Format command. If no
vertical tab stops are below the current print position, a vertical
tab results in a line feed. If a vertical tab is requested with the
print position below the bottom margin, it results in a move to
the top margin of the next page.
Where:
0B
The control sequence of the Vertical Tab
command
command
Word Underscore (WUS) (twinax only)
X'23'
Causes the preceding complete word/words to be underscored
back to the word begin delimiter.
back to the word begin delimiter.
Where:
23
The control sequence of the Word Underscore
command
command
XEROX COAX/TWINAX OPTION (XCTO) PROGRAMMER REFERENCE
2–87