Xerox 4213 MICR MRP Betriebsanweisung

SPECIAL FEATURES

The command to enter the Multibyte
Transparency mode.

The

 

hex values which define ISO6937 code

points. Only the characters A-F and 0-9 are valid
characters for defining the hex codes. All other
characters, commands, and control codes are
stripped out.

A text string which must be enclosed in either
single or double quotes. Only alphanumeric
characters and spaces are allowed between the
quotes. These are translated to the equivalent
ISO6937 value for printing.

The interface escape character which terminates
the Multibyte Transparency mode.

Note 1: If an error is detected during transparency, for example,
an odd number of bytes or a byte not in the range of F0-F9 or
C1-C6, an appropriate error message is logged. In this mode hex
values between 81-86 are treated as if they are equivalent to C1-
C6.

Note 2: In this mode, if auto new line and auto new page are
enabled, they are ignored. Therefore no new lines or form feeds
are added.

prints the following in bold characters:

3–22

XEROX COAX/TWINAX OPTION (XCTO) PROGRAMMER REFERENCE