Xerox 4213 MICR MRP Betriebsanweisung
SPECIAL FEATURES
Select APL translate table
This command causes the specified translate table to become the
active translate table. Before modifying a table, it must be
selected as the active translate table.
active translate table. Before modifying a table, it must be
selected as the active translate table.
Command format:
@Y78,<table number>@
@
The interface escape character
Y78
The command that selects the APL translate table
, (comma)
The command delimiter
<table
number>
The number that identifies the translate table in
the range 1 to 8.
the range 1 to 8.
@
The interface escape character
Modify APL translate table
This command is used to modify entries in the active customised
translate table. The modifications become active immediately and
are stored directly in non-volatile memory (NVRAM). Up to eight
characters may be defined for each code point.
translate table. The modifications become active immediately and
are stored directly in non-volatile memory (NVRAM). Up to eight
characters may be defined for each code point.
Command format:
@Y80,<CTT>,<APL>@
@
The interface escape character
Y80
The command that modifies the APL translate
table
table
, (comma)
The command delimiter
<CTT>
The entry in the active customised translate table
(EBCDIC code page 310)
(EBCDIC code page 310)
, (comma)
The command delimiter
<APL>
The entry in the APL translate table
@
The interface escape character
XEROX COAX/TWINAX OPTION (XCTO) PROGRAMMER REFERENCE
3–35