Xerox 4213 MICR MRP Betriebsanweisung
SPECIAL FEATURES
Save to NVRAM
This command saves the software commands in the XCTO’s non-
volatile memory (NVRAM). The commands concerned were those
that were discussed under ”Set defaults” in this chapter and
those set at the printer’s control panel, Once saved, the settings
are not lost when the printer is powered down.
volatile memory (NVRAM). The commands concerned were those
that were discussed under ”Set defaults” in this chapter and
those set at the printer’s control panel, Once saved, the settings
are not lost when the printer is powered down.
The command is:
@X<n>
Where n is
1
Saves all current settings, except the interface
escape character in NVRAM
escape character in NVRAM
2
Saves all current settings in NVRAM including the
interface escape character
interface escape character
3
Saves the factory default settings in NVRAM. This
action causes the saved software setup
commands to be overwritten by the factory
default commands, effectively resetting the
NVRAM and the RAM
action causes the saved software setup
commands to be overwritten by the factory
default commands, effectively resetting the
NVRAM and the RAM
4
Reads the settings currently saved in NVRAM into
RAM. This action causes any unsaved settings to
be overwritten by the currently saved commands.
RAM. This action causes any unsaved settings to
be overwritten by the currently saved commands.
Note: These commands have no effect upon the special features
options that are available only at the printer control panel.
options that are available only at the printer control panel.
XEROX COAX/TWINAX OPTION (XCTO) PROGRAMMER REFERENCE
3–75