Xerox 4213 MICR MRP Betriebsanweisung
FONTS AND CHARACTER SETS
2BD2 04 29 00 0A
0A, the cp parameter in the above command, specifies a pitch of
10 CPI. (stage 1, see table 5-3)
10 CPI. (stage 1, see table 5-3)
For stage 2, the GFID 11 matches to Xerox font Titan 10M (see
table 5-1).
table 5-1).
Character sets
When operating in the ISO6937 mode the default XCTO
character set is defined at power up by the user defined default
selection stored in nonvolatile memory (NVRAM). This can be
changed by SCS/DCA data stream commands which select the
character set by either a language identifier (in SCGL command)
or a Code Page Global Identifier (CPGID, in SCG command).
They can also be selected by special feature translation table
commands. Up to 8 customised tables can be downloaded and
stored in nonvolatile memory (NVRAM).
character set is defined at power up by the user defined default
selection stored in nonvolatile memory (NVRAM). This can be
changed by SCS/DCA data stream commands which select the
character set by either a language identifier (in SCGL command)
or a Code Page Global Identifier (CPGID, in SCG command).
They can also be selected by special feature translation table
commands. Up to 8 customised tables can be downloaded and
stored in nonvolatile memory (NVRAM).
Table 5-4 shows the IBM code pages/character sets supported
and the corresponding language identifier:
and the corresponding language identifier:
5–8
XEROX COAX/TWINAX OPTION (XCTO) PROGRAMMER REFERENCE