Xerox 4213 MICR MRP Betriebsanweisung
INTRODUCTION
Configuration
You may switch emulations using the printer control panel. When
changing emulations, port switching is automatic, as the IBM
printer emulations supported by XCTO do not function with the
serial and parallel ports. The port switching capabilities enable all
three ports (serial, parallel and IBM) to be connected at the same
time and to be active according to the currently selected
emulation.
changing emulations, port switching is automatic, as the IBM
printer emulations supported by XCTO do not function with the
serial and parallel ports. The port switching capabilities enable all
three ports (serial, parallel and IBM) to be connected at the same
time and to be active according to the currently selected
emulation.
You can reconfigure XCTO between coax and twinax. This and
other configuration functions can be performed at the printer
control panel. Changing between coax and twinax environments
causes XCTO settings to be reset to factory defaults.
other configuration functions can be performed at the printer
control panel. Changing between coax and twinax environments
causes XCTO settings to be reset to factory defaults.
XEROX COAX/TWINAX OPTION (XCTO) PROGRAMMER REFERENCE
1–13