Xerox 4213 MICR MRP Betriebsanweisung

SUPPLIES:  ORDERING INFORMATION

An extensive font library and customised fonts are available.
Contact your local Rank Xerox representative to order additional
fonts. 

Note:  When a font cartridge is installed in the LJ2D emulation
and the manufacturer has defined a default font on the cartridge,
then this default overrides any default font that is selected on the
printer.

Font cartridges must be installed while the 4213 is powered off.
Font cartridges installed while the printer is on are not
recognised and may lock up the printer

Insert the font cartridge, label upwards, into one of the two slots
located at the base of the printer.  When you feel resistance,
there is approximately another 6.35 mm or 1/4 inch to push to
make sure the cartridge is fully seated.

Caution:  Do not use excessive force when inserting the font
cartridge into the printer, or you may damage the font cartridge
or the printer connector.

To confirm proper installation follow these steps:

1. Power on the printer.

H

2. Press the Online button to take the printer off line  (The

online indicator light is not lit.)

B

3. Press and release the Test button on the printer control panel

to access the Test Menu.

C

4. Press the Last Page button until FONTS STATUS is displayed.

D

5. Press the Select button to print a font status sheet.  All

available fonts, including the fonts that you installed, are
listed on the status sheet.  Cartridge fonts are identified by
either Left Cartridge or Right Cartridge on the status sheet.

H

6. Press the Online button to put the printer back online.  (The

online indicator light is lit.)

Note:  Do not insert or remove the font cartridge while the
printer is online.

XEROX 4213 LASER PRINTER USER GUIDE

7-3