Xerox 4213 MICR MRP Betriebsanweisung
POSTSCRIPT EMULATION
Figure A4-1.
PDL package contents
1. PDL board
2. Mounting pegs
2. Mounting pegs
Memory requirements
This option requires a minimum of 4 MB (or two 2 MB SIMM
boards) of additional memory.
boards) of additional memory.
If your printer does not have the required extra memory, call
your sales representative.
your sales representative.
Note: The PDL kit complete supplies 6 MB as standard.
Before you begin
If you do not wish to install the PDL board or coprocessor
yourself, call for service and for a nominal charge, a local service
representative will be sent to perform the installation for you.
yourself, call for service and for a nominal charge, a local service
representative will be sent to perform the installation for you.
If you choose to do the installation yourself, refer to the
following instructions.
following instructions.
Perform the following steps before beginning the PDL board
installation procedures. (Refer to figure A4-2.)
installation procedures. (Refer to figure A4-2.)
A4-2
XEROX 4213 LASER PRINTER USER GUIDE