Xerox 4213 MICR MRP Betriebsanweisung
MULTI MEDIA FEEDER
•
Light images on envelopes in low humidity conditions
•
Image permanence/degradation in solid density areas when
using heavy weight paper (160 gsm) in extreme humidity
conditions
using heavy weight paper (160 gsm) in extreme humidity
conditions
•
Excessive envelope skew when using low grade envelope
stock
stock
•
Image degradation caused by contamination of the printer
when using pressure sensitive labels which have adhesive
coating extending to the edge of the stock
when using pressure sensitive labels which have adhesive
coating extending to the edge of the stock
•
Label misfeeding due to curl in extreme humidity conditions.
Optimizing MMF performance
•
Do not expose unwrapped paper media to humidity
extremes (that is, outside the range of 35 to 55% relative
humidity) or temperature extremes (below 10
extremes (that is, outside the range of 35 to 55% relative
humidity) or temperature extremes (below 10
o
C [50
o
F] or
above 32
o
C [90
o
F]).
•
In high humidity conditions, store envelopes, paper, and
labels in a sealed plastic bag.
labels in a sealed plastic bag.
•
Always allow paper media to acclimatise to the same
environment as the printer if there is a significant
temperature difference between the paper storage area and
the printer location.
environment as the printer if there is a significant
temperature difference between the paper storage area and
the printer location.
•
Do not load media above the MAX lines on the adjustable
side guide. Envelopes should not exceed the higher MAX
line. All other media should not exceed the lower MAX line.
side guide. Envelopes should not exceed the higher MAX
line. All other media should not exceed the lower MAX line.
•
Keep envelope addresses within the area described in
chapter 4 of the User Guide, “Printing with the 4213”.
chapter 4 of the User Guide, “Printing with the 4213”.
•
Before purchasing large quantities of special paper media, do
a trial run with that media to evaluate print quality and paper
handling performance.
a trial run with that media to evaluate print quality and paper
handling performance.
•
If skewing of the media persists, make sure the MMF
mounting bracket is tightly secured to the printer and that
the MMF is securely mounted onto the pins of the bracket.
mounting bracket is tightly secured to the printer and that
the MMF is securely mounted onto the pins of the bracket.
•
If you experience print quality problems when using special
media such as labels, card stock or envelopes, run a job from
a fixed tray, using standard 20 lb. (80 gsm) paper before you
call Xerox Service. This will help isolate the problem, for
example, media, printer, MMF.
media such as labels, card stock or envelopes, run a job from
a fixed tray, using standard 20 lb. (80 gsm) paper before you
call Xerox Service. This will help isolate the problem, for
example, media, printer, MMF.
XEROX 4213 LASER PRINTER USER GUIDE
A6–15