Xerox Xerox Secure Access Unified ID System Support & Software Ratgeber Für Administratoren
Appendices
Xerox Secure Access Administration Guide
44
Resetting an Authentication Device
Use the bypass key to reset the Authentication Device to the default settings. This key was provided
with the device and should be stored in a safe place.
1. Ensure the Authentication Device is powered on.
2. Insert the bypass key into the key slot.
3. Turn the key a quarter turn TOWARD you.
4. Turn the key back to the original position.
5. Remove the key.
with the device and should be stored in a safe place.
1. Ensure the Authentication Device is powered on.
2. Insert the bypass key into the key slot.
3. Turn the key a quarter turn TOWARD you.
4. Turn the key back to the original position.
5. Remove the key.
Note:
The device will beep every 10 seconds if the key is not turned back to its original position
before you remove the key.
Port Assignments
Secure Access communicates on the following ports
When you install Secure Access, these ports are opened automatically. However, if you need to work
around Windows firewall settings, you can add the ports to the trusted list on each machine where you
deployed a Secure Access Server component.
around Windows firewall settings, you can add the ports to the trusted list on each machine where you
deployed a Secure Access Server component.
Component
Port
CAS
TCP 2910
DRE
TCP 2938
DCE
TCP 1824, TCP 2939, UDP 2613
Secure Access Authentication Device
TCP 1234