Xerox Phaser 140 Betriebsanweisung
Troubleshooting
6
User Manual
6-3
■
If you have a PC, type these DOS ECHO commands:
echo %! > port
echo showpage[CTRL-D] > port
Where [CTRL-D] indicates pressing the D key while holding
down the CTRL key. Substitute the name of the printer port (for
example, LPT1:, LPT2:) for the variable port in this command. For
example, if you are testing a parallel connection on LPT1, type:
down the CTRL key. Substitute the name of the printer port (for
example, LPT1:, LPT2:) for the variable port in this command. For
example, if you are testing a parallel connection on LPT1, type:
echo %! > LPT1:
echo showpage[CTRL-D] > LPT1:
If the communication link between your computer and the printer
is working, the printer ejects a blank page. If this works, but you
cannot print from your application or through Windows, make
sure that the appropriate driver is installed and that you have
selected the printer correctly.
is working, the printer ejects a blank page. If this works, but you
cannot print from your application or through Windows, make
sure that the appropriate driver is installed and that you have
selected the printer correctly.