Xerox Phaser 240 Betriebsanweisung
Getting Set Up
2
User Manual
2-25
b.
If you have the standard 17 fonts, select
Tek Phaser 240 (TekColor) 17
Tek Phaser 240 (TekColor) 17
.
If you have the optional font upgrade (Tektronix order number
4681F1F) with 22 additional fonts (a total of 39 fonts), select
Tek Phaser 240 (TekColor) 39
4681F1F) with 22 additional fonts (a total of 39 fonts), select
Tek Phaser 240 (TekColor) 39
.
Note
If the printer has the font upgrade, you must install the
Tek Phaser 240 (TekColor) 39
Tek Phaser 240 (TekColor) 39
driver for Windows to recognize
and use all of the printerÕs fonts.
If you select Tek Phaser 240 (TekColor) 39 and you only have
the standard 17 printer fonts, any of the additional fonts selected
within an application are printed in the Courier font.
the standard 17 printer fonts, any of the additional fonts selected
within an application are printed in the Courier font.
c.
Click
OK
. The driver software you need is automatically
installed.
Note
The printerÕs conÞguration page contains the information you
need to set up the printer port. For information on printing a
conÞguration page, see ÒPrinting the conÞguration pageÓ on
page 6-13.
need to set up the printer port. For information on printing a
conÞguration page, see ÒPrinting the conÞguration pageÓ on
page 6-13.
7.
Assign the printer to a port:
a.
Select the printer from the list of Installed Printers.
b.
Click Set As Default Printer if you want this printer to be the
default.
default.
c.
Click Connect to display the Connect dialog box.
d.
In the Connect dialog box, set the Transmission Retry value to
850
850
. Refer to your Windows documentation for details.