Xerox Xerox iGen3 Digital Production Press with Xerox CX Print Server, Powered by Creo Merkblatt
Xerox iGen3 90/100/110 Digital Production Press FX-Australia Recommended Media List January, 2008
Warranty Disclaimer
Fuji Xerox offers no guarantees or warranties, either expressed or implied, concerning the performance, use or replacement of non-Xerox branded media or throughput products. Customers should inquire
directly of their paper distributor or manufacturer for any guarantees they may offer. When purchasing a particular media product for the first time, customers are advised to purchase small quantities to
insure their expectations are met. The quality of Xerox supplies is consistent from ream to ream and is backed by a 100% guarantee. The quality of non-Xerox branded paper may vary from ream to ream
or carton to carton, so for optimum performance on Xerox color equipment, use only the best - Xerox supplies. To learn more about the benefits of using Xerox Supplies, please contact your Supplies
Representative.
Xerox, The Document Company, the stylized X, and all Xerox names and product numbers mentioned in this publication are trademarks of Fuij Xerox Company Limited or Xerox Corporation.
directly of their paper distributor or manufacturer for any guarantees they may offer. When purchasing a particular media product for the first time, customers are advised to purchase small quantities to
insure their expectations are met. The quality of Xerox supplies is consistent from ream to ream and is backed by a 100% guarantee. The quality of non-Xerox branded paper may vary from ream to ream
or carton to carton, so for optimum performance on Xerox color equipment, use only the best - Xerox supplies. To learn more about the benefits of using Xerox Supplies, please contact your Supplies
Representative.
Xerox, The Document Company, the stylized X, and all Xerox names and product numbers mentioned in this publication are trademarks of Fuij Xerox Company Limited or Xerox Corporation.
The following media list is a supporting document to the Xerox iGen3 90/100/110 Digital Production Press paper guide. It contains a list of the Fuji Xerox media that has been evaluated for use in the
Xerox iGen3 Digital Production Press and is recommended. This document will be updated regularly to reflect the most current media recommendations. Suggested machine adjustments as well as
best practices for operation are included where applicable in order to optimise media performance.
Xerox iGen3 Digital Production Press and is recommended. This document will be updated regularly to reflect the most current media recommendations. Suggested machine adjustments as well as
best practices for operation are included where applicable in order to optimise media performance.
Media that is unsuitable for use and therefore not recommended is referred to in the Xerox iGen3 90/100/110 Digital Production Press are referred to in the iGen3 Paper Guide.
Questions concerning the performance of any listed media can be referred to the Document Supplies Division hotline 13 14 11.
Note on Stock Size: Media sizes should be selected based on the job application. Refer to the Xerox iGen3 90/100/110 Digital Production Press Paper Guide for acceptable sizes.
Instructions for programming media listed in this document but not yet in the iGen3 stock library can be found in the customer training manual. Specific media attributes needed to program media
into the stock library are included in this document.
into the stock library are included in this document.
When using the Xerox DocSP Controller, all stocks will be automatically connected to the colour profiles and calibration.
To program a stock with a non-default settings, see the DocuSP 3.7 Customer Documentation or the on-line help on the DocuSP Colour Server: On-Line Help/Colour Management/using Colour
Profiles. When using a Creo DFE, colour mapping is done using the Paper Stock Colour.
To program a stock with a non-default settings, see the DocuSP 3.7 Customer Documentation or the on-line help on the DocuSP Colour Server: On-Line Help/Colour Management/using Colour
Profiles. When using a Creo DFE, colour mapping is done using the Paper Stock Colour.