Xerox FreeFlow Accxes Submit Support & Software Betriebsanweisung
FreeFlow Accxes Submit
Accxes Submit – First Use
Printers field
In the Settings window, below the Printers field, click [New] to open the Printer Details
window shown below:
window shown below:
Accxes-based Printers
If configuring Accxes Submit to print direct to a Xerox Wide Format Accxes-based
printer, enter the name of the printer in the Name field and the TCP/IP address of the
Accxes controller in the Address field.
printer, enter the name of the printer in the Name field and the TCP/IP address of the
Accxes controller in the Address field.
FreeFlow Accxes Control
If configuring Accxes Submit to print to FreeFlow Accxes Control software, enter the
name of the Accxes Control network hotfolder in the Name field and the TCP/IP
address of the PC hosting Accxes Control in the Address field.
It is possible to set up more than one printer in Accxes Submit to print to more than
one network hotfolder in Accxes Control. Different Accxes Control network hotfolders
are addressed by adding the network port number to the TCP/IP address in the Name
field as shown in the example below:
name of the Accxes Control network hotfolder in the Name field and the TCP/IP
address of the PC hosting Accxes Control in the Address field.
It is possible to set up more than one printer in Accxes Submit to print to more than
one network hotfolder in Accxes Control. Different Accxes Control network hotfolders
are addressed by adding the network port number to the TCP/IP address in the Name
field as shown in the example below:
Example
Two network hotfolders have been configured within Accxes Control:
One hotfolder is created with the name ‘Wide Format Colour’ and configured to
use port 9500. Everything printing to this hotfolder is sent to a wide format
colour device and does not use any rules to affect processing.
A second hotfolder is created with the name ‘Automatic’ and configured to use
port 9600. Everything printing to this hotfolder is subject to rules that split print
jobs according to size and colour.
Within Accxes Submit, configure the first printer to address the Wide Format
Colour hotfolder using port 9500 as follows:
In the Printer Details Name field, enter a name such as ‘Wide Format Colour’ or
anything else that identifies the wide format colour device.
One hotfolder is created with the name ‘Wide Format Colour’ and configured to
use port 9500. Everything printing to this hotfolder is sent to a wide format
colour device and does not use any rules to affect processing.
A second hotfolder is created with the name ‘Automatic’ and configured to use
port 9600. Everything printing to this hotfolder is subject to rules that split print
jobs according to size and colour.
Within Accxes Submit, configure the first printer to address the Wide Format
Colour hotfolder using port 9500 as follows:
In the Printer Details Name field, enter a name such as ‘Wide Format Colour’ or
anything else that identifies the wide format colour device.
FreeFlow Accxes Submit User Guide
2-3