Craftsman 14926 Produktdatenblatt

Side

Leveler

washer

Nut

Side

Front Rail

1.5"

(38 mm)

•   Assemble (2) Screw Levelers in Side. Make sure both 

Levelers are fully retracted in Side.

Bolt

Figure 2

Figure 1.1

Figure 1.2

3

•  Ensure that the leveling screws on the existing 

workbench are extended to at least (1.5) inch, (38 mm). 

(See leveling foot adjustment.)

Side (Qty:1)

Screw Leveler (Qty: 2)

Front Rail (Qty: 1)

1/4-20 x 5/8″ carriage Bolt (Qty: 10)

5/16″ washer (Qty: 10)

1/4-20 Serrated Flange Nut (Qty: 10)

note: when installing on 8' workbench, remove inner 

support rails before installing side.

note: Drawer kit may be installed on left or right side. 

Installation shown on right side.

•  Install Side using (6) 1/4-20 x 5/8″ carriage Bolt, (6) 

5/16″ washer, (6) 1/4-20 Serrated Flange Nut.

•  Attach Front Rail, as shown, using (4) 1/4-20 x 5/8″ 

carriage Bolt, (4) 5/16″ washer, and (4) 1/4-20 Serrated 

Flange Nut.

• Finger tighten.

•  Adjust bench to desired height. (See leveling  

foot adjustment.)